Pumps & Backups

Sump Pump Installation and Replacement in St. Paul, MN

Also Serving Minneapolis, St Louis Park, and Roseville, MN

    Non-Clogging vortex impeller3/10 HP Premium 115V sump pumpFlows up to 43 gpm (163 lpm) per minuteAdvanced switch technology allowing longer switch life (available in automatic only)UL Listed 3-wire cord plugCorrosion resistant powder coated epoxy finishAll cast iron construction for a more robust pumpStainless steel hardwareNo screens to clogWatertight neoprene gasket between motor and pump housingMotor – 60 Hz, 1550 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protectedUpper and lower sleeve bearings running in bath of oilCarbon and ceramic shaft sealMaximum temperature for effluent or dewatering – 130°F (54°C)Passes 1/2" inch spherical solids1 1/2" NPT DischargeOn point – 7 1/4"Off point – 3"5 year warranty
Sump Pump Model 63 Series — Lino Lakes, MN — Rite-Way Waterproofing

Note: The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non-automatic pumps.

Model 98 Cast Iron Series – 1/3 Horse

    Non-clogging engineered plastic vortex impeller designCorrosion resistant powder coated epoxy finishDurable cast construction. Cast switch case, motor, pump housing and base. No sheet metal parts to rust or corrodeCastings – All cast iron class 25-30 25000# tensile strengthStainless steel screws, guard, handle, arm and seal assemblyFloat operated submersible (NEMA 6) 2-pole mechanical switchMotor – Permanent split capacitor, 60 Hz, 1725 RPM, oil-filled, thermetically sealed, automatic reset thermal overload protectionBearings – Upper & lower oil fed cast ironCarbon and ceramic shaft sealEntire unit pressure tested after assemblyWatertight neoprene ring between motor and pump housingMaximum temperature for effluent or dewatering 130°F – 54°CPasses ½ inch spherical solidsNo screens to clogStandard cord length 15 ft. (UL Listed)1½" NPT Discharge (1½" X 2" PVC Adapter included with BN & BE Models)On point – 9½"Off point – 3"Major width – 10 1/8"Height – 12"
Sump Pump Model 93 Cast Iron Series — Lino Lakes, MN — Rite-Way Waterproofing

Note: The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non-automatic pumps.

Services

    Interior WaterproofingDrain Tile – Tubing MethodDrain Tile – PolyDrain MethodExterior WaterproofingFrench DrainsSump Pump Repair & ReplacementBack-Up Battery SystemsCrawl Space Vapor BarriersFoundation RepairWall BracingWall StraighteningLEAD Safe Certified NAT-70330-1Radon MitigationEgress Window Installation & Waterproofing
Share by: